CAME-TV Crystal V and CAME-ASTRAL Combo (1 Each)

This a combo kit of 1 CRYSTAL-V and 1 CAME-ASTRAL. By purchasing this kit you will save some significant money vs purchasing individually. A great combo for the budding or seasoned operator.

Download the PDFCrystal V Manual Here

The Transmitter can be powered by either v-mount or NP battery via the now included v-mount to NP adapter.
The receiver is powered by a NP battery.

Features:
IOS, Android App monitor
500 meters distance (160 ft)

TX:
1. Support HDMI in and SDI in. SDI loop out, USB 5V output.
2. V-mount battery can be used. It can be mounted to V-mount plate, power for both transmitter and camera. optional NP battery plate.

RX:
HDMI OUT, SDI OUT

Item	Transmitter（TX）	Receiver（RX）
Freqency	5.180GHZ
Antenna	4DB Blade Dual Antenna
Network Bandwidth	10MHz
Power Interface	DC2.1，7-24V
SDI Loopout	1080P@60/1080P@50/720P60/720P@50	N/A
USB port	Output DC voltage 5V-2A	N/A
Channel Option	N/A	Short press about 1S to switch HDMI、SDI、HDMI&SDI，3 different Channels
Input  Branch(Max)	SDI&HDMI input simultaneously	SDI&HDMI output simultaneously
Battery	Support V-mount battery （Support NP battery with adapter plate）	Support NP battery
Working Current	12V 510mA@6.12W	12V 550mA@6.6W
Power Led	Red
Network Led	Yellow
Video Led	Blue
Working Temperature	-10-65°
The Resolution supported by the Receiver
Resolution	Frame	Description
1080P	60	If the resolution exceeds 1080P60, the unified decoding is 1080p@60. Other 1080 resolutions are converted to similar resolutions, such as 59.94 to 60 and 24 to 25
1080I	60
1080P	50
1080I	50
1080P	30
1080P	25
720P	60	Other frames of 720P are decoded into 720P@60
720P	50
576P	50
480P	60

Use the Astral 2.4 GHz Wireless Follow Focus System from CAME-TV to wirelessly control the focus, iris, or zoom of most DSLR, mirrorless, or cine-style lenses. The core of the system is the pairing of the focus control motor and the focus handwheel. The units can connect to each other from 328' away using a 2.4 GHz wireless signal. The motor can be mounted using its integrated 15mm rod clamp, and the focus wheel controller can be mounted using its 1/4"-20 thread.

The controller features a built-in marking disk and an OLED display that provides battery level, connection, calibration, travel, and memory information, and its menus can be navigated using the buttons on the controller. The controller and motor also support run/stop and shutter functions, as well as setting hard A/B/C/D limits for more control over your camera and lens. It also features a loop to attach the controller to a strap or lanyard.

The motor features an 0.8 MOD gear and can operate at a high-torque, 0.5Nm speed at a maximum 250 rpm. It has a mini-USB port that allows you to connect a camera for run/stop remote control or update firmware with a separately available cable. It is calibrated by a simple automatic process that can be saved to memory. The handwheel is powered by a built-in 1000mAh LiPo battery that lasts up to 8 hours on a full charge, and the motor is powered by your camera or external battery via the included D-Tap to 6-pin LEMO-type cable.

(2020/2/21 Updated) Download the PDF Manual Here